Specifications
company
product
support
buy
contact

Filtered Tri-Axial 6 Degree-of-Freedom MEMS IMU Module
The Gyrocube 3F is a member of the Gyrocube series of six degree-of-freedom IMU modules. These products have tri-axial MEMS based angular rate and accelerometer sensors with filtered analog outputs. The Gyrocube3F is a complete 6DOF analog IMU solution in just over 1 cubic inch of volume. An optional digitizer module is available for easier interface to digital systems. On-board temperature sensor for compensation. Accelerometer options for ±2g & ±10g's. Angular rate gyro sensitivities of ±200 or ±400°/sec. Standard systems are factory set for unity gain. High performance 5th order elliptic low-pass filters on all IMU channels configurable from 1-100Hz.

=OEM INERTIAL SENSORS

INERTIAL
ANGULAR RATE
Angular Rate Range: ±200°/sec (±400°/sec available)
Bandwidth: 48Hz (Default -- 1-100Hz available)
Filtering: 5TH Order Elliptic Low Pass
Start-up Time: <1 sec

ACCELERATION
Acceleration Range:
±2g (±10g available)
Bandwidth: 48Hz (Default -- 1-100Hz available)
Filtering: 5TH Order Elliptic Low Pas

ELECTRICAL
Output: 0-5V (Center 2.5V (0°/sec / 0g nominal)
Interface Connector: JST - B12B-ZR
Mating Connector: JST - ZHR-12
Input Voltage: 5V (±2%)
Current: 39mA
Power: 195mW

PHYSICAL
Temp Range (OP): -
Temp Range (NOP): -
Vibration (NOP): -
Shock (NOP): -
Mass: 8.2g
Dimensions: 1.5" X 1.25" X 0.6"

SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE

OPTIONS
Gyrocube 3F Development Kit
Includes: Interface Cable, DC Power Supply, Stand-offs and Screws

Cable with Power Supply Connector - P/N: 305-1235A PDF
Cable with Flying Leads - P/N: 305-1206A PDF
Bridge Cable (Digitizer Interface) - P/N: 305-1226A PDF
DC Power Supply (5V) - P/N: 310-0502B PDF
Digitizer/MX Module with Serial Output - LINK
Serial/Power Cable for DigititzerMX - PDF
Stand-Off/Mounting Kit PDF

ORDERING INFORMATION
23504-200-0020-A - Gyro: ±200°/sec /
Acceleration: ±2g / (48Hz)
23504-200-0100-A - Gyro: ±200°/sec /
Acceleration: ±10g / (48Hz)
23504-400-0020-A - Gyro: ±400°/sec /
Acceleration: ±2g / (48Hz)
23504-400-0100-A - Gyro: ±400°/sec /
Acceleration: ±10g / (48Hz)

Increased sensitivity available. Please contact us for details.

PRICE LIST PDF

CABLING DIAGRAM PDF

PAT. PEND.

ORDERING & PRICING INFORMATION
DATA SHEET PDF
BACK TO PRODUCTS